Filter By:
- Rigid (40)
- Suspension (64)
- Show More Brands
- Show Fewer Brands
Forks
$349.99
All Box One forks are engineered and crafted using our Oversized Technology. These forks are the most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high loads. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency.
Key differences: This particular model fork is tailored for larger-sized racers. It also takes our application of Oversized Technology one step further as it includes a tougher 1-1/8 inch chromoly steerer tube and stiffer 20mm through-axle cold-forged dropouts.
Weight Limit: 115kg (253 lbs) with limitations per Category 2 of EN 16054:2012 Standard.
FEATURES
- Oversized Technology™
- Chromoly Steel Steerer Tube to Accommodate Larger-Sized Racers
- 20mm Through Axle to Increase Responsiveness
- Internal Butterfly for Added Durability at Steerer Tube and Fork Crown Interface
$144.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. Investment cast 1pc drop outs for maximum strength and a super sleek finish. 1-pc machined steerer tube with an integrated bearing race, tapered legs, and tire clearance for big tires. Lifetime warranty.
$144.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. Investment cast 1pc drop outs for maximum strength and a super sleek finish. Features an updated top cap retention design.
- 1-pc machined steerer tube with an integrated bearing race
- Tapered legs
- Tire clearance for 2.40” tires
- Updated top cap retention design
$169.99
Made from revised 100% Cult Classic tubing for increased strength and then 100% post-weld heat treated. 1-pc machined steerer tube with an integrated bearing race, tapered legs, and plenty of tire clearance.
$1,099.99
The Cane Creek Helm MKII Air Suspension Fork features an upgraded damper design for increased support and control and a redesigned air spring that allows for increased air volume for better traction and suppleness.
- D-Loc 15mm bolt-on thru-axle
$89.99
- Forged dropouts with eyelets, straight-gauge oval tapered blades
- Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing
- 85mm threaded section
- Fits up to 30c tires
- Axle to Crown Length: 382 mm
- Brake Mount (Fork): Long Reach Caliper (55mm - 73mm)
- Crown Race: 27
- Front Axle: 9mm x 100mm
- Material: Steel
- Offset: 50mm
- S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill
- Steerer Type: Straight
- Weight: 839g, 876g, 907g
- Wheel Size: 27"
$450.00
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness.
When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.
$550.00
A purpose built carbon fiber fork for gravel and cyclocross applications featuring internal hose routing, flat mount brake compatibility, and clearance for up to 50mm tires. This fork is perfect for gravel riders looking for more clearance, weight savings, compliance, and the versatility of fender mounts to enhance their gravel grinding experience.
- Material: Carbon
- Weight: 520g
- Steer Tube Length: 350mm
- Rake: 50mm
- Axle To Crown: 395mm
- Max Rotor Size: 140mm – 160mm
- Max Tire Clearance: 700c x 50c, 27.5 x 2.25-inch
- Crown Race Diameter: 1.5-inch
- Torque Spec - Steer Tube: 5.5Nm
- Torque Spec - Axle: 8Nm
$575.00
The ultimate aftermarket disc brake specific road cycling fork featuring 32mm of tire clearance and solid 12mm thru-axle for secure and confident handling. Building upon nearly a decade of experience making the world's best forks, ENVE's latest road disc fork features a modern 32mm of tire clearance, a low axle-to-crown height of 370mm, internal hose routing, and a lightweight one-piece form construction developed specifically to handle the demands of disc brakes, rough roads, and large volume tires.
- Material: Carbon Fiber
- Steerer Tube Length: 350mm
- Rake: 43, 50mm
- Axle to Crown: 370mm
- Brake: Disc
- Axle Compatibility: 12mm
- Max Rotor Size: 160mm
- Max Tire Clearance: 32mm
- Crown Race Diameter: 1.25
- Torque Spec: Steer Tube: 5Nm
- Torque Spec: Axle: 8Nm
- Weight: 425g
$625.00
A truly all season, all terrain fork for fat-bikes with maximum tire clearance. This fork utilizes a reversible drop-out chip that adjusts the rake, allowing for multiple wheel sizes. With over 10 years of carbon experience, ENVE is the trusted source for many when it comes to forks. After creating the most innovative rigid mountain fork in the market, we set our sights on fat bike forks. Like all ENVE Forks, the Fat Fork is molded in one-piece from the steerer to the drop-outs and utilizes a reversible chip to adjust for optimized handling with 26 or 27.5-inch wheels. Adding trusted reliability and lightweight design to 5-inches of tire clearance, this is the upgrade to have for your all-season rig.
- Material: Carbon
- Weight: 748g
- Steer Tube length: 350mm
- Rake: 42mm, 51mm (adjustable)
- Axle To Crown: 488.8mm
- Max Rotor Size: 160mm - 203mm
- Max Tire Clearance: 5.2-inch
- Crown Race Diameter: 1.5-inch
- Torque Spec – Steer Tube: 5.5Nm
- Torque Spec - Axle: 8Nm
$650.00
There is beauty in simplicity and it's hard to argue with the simplicity of an unsuspended mountain bike. Despite its uncomplicated nature, ENVE's rigid Mountain Fork is loaded with unique features such as a removable fender, disc brake hose clip, and reversible axle inserts to fine tune the rake of the fork to match your ride preference and application.
- Material: Carbon Fiber
- Steerer Tube Length: 300mm
- Rake: 44, 52 Adjustable
- Axle to Crown: 470mm
- Brake: Disc
- Max Rotor Size: 180mm
- Max Tire Clearance: 3.4-inch
- Crown Race Diameter: 1.5-inch
- Torque Spec: Steer Tube: 5.5 Nm
- Torque Spec: Axle: 8Nm
- Weight: 711g (w/ fender), 686g (w/ clasps)
$650.00
Riding rigid isn’t for everyone, but for those who value functional simplicity, the updated ENVE Mountain Fork delivers.
BOOST (15X110MM)
- Material: Carbon
- Accessory Mounts: Yes
- Weight: 719g with Fender, 676g (w/ clasps)
- Travel Correction: 120mm (Compatible with frames designed around 100mm-140mm Travel Forks)
- Steerer Tube Length: 300mm
- Rake: Adjustable – 44mm, 52mm
- Axle To Crown: 490mm – 44mm Rake Position; 492mm – 52mm Rake Position
- Brake: Disc
- Brake Mount: Post Mount
- Axle Compatibility: 15 x 110mm
- Max Rotor Size: 180mm
- Max Tire Clearance: 29 x 3.0” with Fender
- Crown Race Diameter: 1.5”
- Torque Spec: Steerer Tube: 5.5 Nm
- Torque Spec: Axle: 8 Nm
$27.00
Service your suspension fork with Enduro Seal KIts.
- Custom made for each make and model of fork
$769.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor.
- Black anodized upper tubes
- 32 mm upper tubes and ample bushing overlap for a quality ride
- Hollowed out lower legs provide even more weight savings
- FIT GRIP damper and FLOAT air spring
- Performance Series black-on-black graphics package
$769.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor.
- Black anodized upper tubes
- 32 mm upper tubes and ample bushing overlap for a quality ride
- Hollowed out lower legs provide even more weight savings
- FIT GRIP damper and FLOAT air spring
- Performance Series black-on-black graphics package
$989.00
The 38 Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately.
- Black anodized upper tubes
- FIT GRIP damper and FLOAT EVOL air spring
- Three on-the-fly compression damping positions: Open, Medium, Firm
- Performance Series black-on-black graphics package
$1,069.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
$1,079.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
- Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,139.00
36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses.
- Genuine Kashima Coating on upper tubes
- FIT GRIP2 Damper and FLOAT air spring
- E-Bike Chassis
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
$1,139.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
$1,149.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability.
- Genuine Kashima Coating on upper tubes
- FIT damper and FLOAT EVOL air spring
- Low friction seals for improved performance
- Lower Leg Bleeders and Bypass Channels
- Floating axles for perfect alignment
- Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,149.00
Packed with features to dominate the descents, the 36 answers the call from aggressive all-mountain riders. Now available with the gravity-focused GRIP X2 damper.
GRIP X2
Ultimate descending performance with greater traction and even more control at speed. The most tunable, supportive and smoothest descent-focused damper created by FOX.
KABOLT X AXLE
A lightweight bolt-on floating axle that shaves grams while increasing torsional stiffness and reducing friction between upper and lower fork legs for smoother suspension travel.
LOWER LEG BLEEDERS AND BYPASS CHANNELS
Push-button pressure equalization (bleeders) and increased volume to alleviate pressure ramping (bypass channels) allow improved small bump sensitivity and responsiveness.
CHASSIS Standard
DAMPER CONTROLS HSC - LSC - HSR - LSR
AXLE Kabolt-X 110
RAKE 44mm
STEERER 1.5 Tapered
UPPER TUBE FINISH Kashima
AIR CHANNELS Yes
BLEEDERS Yes
FLOATING AXLE Yes
ROTOR SIZE. 180 direct Post Mount, Up to 230 compatible
MUD GUARD MOUNT Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment
AIR SPRING FLOAT EVOL
STARTING WEIGHT 1929g (36, 29, F-S, 160, Grip X, Kabolt X)
$1,249.00
E-Bike specific long-travel Enduro fork with 38mm stanchion tubes featuring, floating axle, new arch design, and lower leg bleeders to release built-up pressure.
- Genuine Kashima Coating on upper tubes
- GRIP2 damper with Variable Valve Control
- Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity
- Floating axle design
- Lower leg bleeders
- Direct mud guard mount
$359.95
Lightweight, stiff, compliant, and available in three sizes to give you more choices for converting your bike over to rigid. With 34mm carbon legs and forged aluminum crowns and dropouts, the Rock Solid family of forks will make your machine a precise, feather-weight, singletrack screamer. 490mm, 465mm, and 445mm models are available.
- Designed for 26", 27.5", or 29" wheel MTB applications, disc only (74mm post-mount)
- 34mm carbon legs with forged aluminum crown and dropouts
- Max Rotor Size 185mm or may void the warranty
- 3 different sizes for optimal ride height.
$314.99
The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade.
- Coil Spring
- ABS+ Compression Damping w/ Jump Stack
- Adjustable TPC Rebound Damping
- Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping
- 20mm hex axle provides superior torsional stiffness
- Forged I-beam style crown: bigger, stronger and more durable
- 1-1/8" threadless steel steerer and 32mm steel stanchions
- Can be reduced to 80mm travel with included spacers
$474.99
The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade.
- 80/100mm or 120/130mm Internally Adjustable Travel
- Air Spring
- ABS+ Compression Damping w/ Jump Stack
- Adjustable TPC Rebound Damping
- Wheel Size: 26"
- 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers
- 20mm hex axle provides superior torsional stiffness
- Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping
- Forged I-beam style crown: bigger, stronger, and more durable
- Alloy steerer, and 32mm aluminum stanchions
$499.99
The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade.
- Air Spring
- ABS+ Compression Damping w/ Jump Stack
- Adjustable TPC Rebound Damping
- 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers
- 20mm hex axle provides superior torsional stiffness
- Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping
- Forged I-beam style crown: bigger, stronger, and more durable
- Alloy steerer, and 32mm aluminum stanchions
$599.99
The Mattoc is an amazing fork due to its versatility yet made even more amazing as its capability to do it all comes without compromise. The “versatile specificity” of this fork means that it adapts perfectly to many disciplines and styles of riding while performing flawlessly in each and every one. The Mattoc Comp’s 34mm Manitou-engineered chassis keeps weight to a minimum while maintaining best-in-class stiffness. Its Expert Air spring with IVA technology, ABS+ compression damping, and in leg adjustable TPC rebound damping make for the smoothest ride you’ve experienced yet. With air, air volume, rebound, and compression adjustments that smooth ride can be tailored to your specific needs. The next step to a better ride starts with Mattoc, #thepeoplesfork.
Key Features:
- 27.5” is 20g less than the previous model.
- Expert air allows for internal travel adjustments with no added parts.
- Expert Air spring systems contain a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Expert Air has identical performance to Dorado Air in a more cost-effective package.
- Incremental Volume Adjust (IVA) modifies the volume in the positive air chamber with self-contained spacers dictating the position of the IVA piston. This allows the main air spring ramp-up to be tuned to the rider weight, style and conditions without the need for additional parts.
- Absolute Plus (ABS+) is a shim stack-based damper that features external incremental Low-Speed compression adjustment.
- 27.5” 110-150mm, 29” 110-150mm.
- TSR (Trail Side Relief) casting bleed screws allow users to release casting pressure from the fork. Casting pressure increases during normal riding. Extreme riding can increase the pressure at a quicker rate. Temperature and elevation changes can also cause increased casting pressure. Releasing casting pressure can improve overall fork feel and small bump compliance.
- Expert air spring and lower weight brings top-level performance to a new price point.
$749.99
Rebirth of an Icon.
The R7 has a vast history of combining a lightweight chassis with performance and reliability. And this latest incarnation of the icon is no different. The new R7 expert pairs superior damping thanks to our 3-position dual piston VTT damper with a lightweight and stiff 32mm chassis.
- VTT damper with compression open mode and rebound adjustability
- 32mm black anodized 6000 series aluminum stanchions with Reverse-Arch design
- Internally adjustable from 120 to 80mm in 10mm increments
- Available in two different offsets 44 or 51mm
$799.99
Featuring 37mm stanchions, home mechanic-approved travel adjustability from 180mm to 140mm, and our easy-to-use VTT-6P damper, the Mezzer Expert is the smart choice for anyone looking to dive into the Enduro Fork market. Should you later decide you would like more adjustability from your fork, factory upgrades such as IRT and MC2 are available and can be easily installed in your own garage. At 2030g this fork is the second lightest option available within the Enduro fork market, second only to the Mezzer Pro of course.
- Expert Air offers ultimate sensitivity featuring a self-equalizing negative air spring.
- IVA (Incremental Volume Adjuster) allows you to modify your positive air chamber volume by rearranging self-contained spacers. You'll never lose a volume spacer again.
- Integrated fender can be installed/removed by three small screws threaded into the arch of the fork.
- VTT-6P damper provides 6 clicks to tune damping for all types of terrain
- 37mm stanchions, Reverse-Arch design, and Hexlock SL2 axle for the ultimate stiffness
- TSR, Trail Side Relief valves on the back of the lower legs allow air to be bled off if it builds up within the lower legs to keep things butter smooth between service intervals
- Internally adjustable travel from 180mm to 140mm in 10mm increments with included spacers
- 2.6" maximum tire width
Page 1 of 4
Next page