Yakima's 9-foot SKS Cable provides a visible theft deterrent for bikes and gear. It locks your load to the crossbar so you can park and leave your vehicle without worrying about your bikes.
Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Rear wheel strap for Boa bike mount. Includes one strap.
Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. They're also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty
Pair of EndCaps for Yakima CoreBar.
Whether you're tinkering on your gear, prepping a meal for your crew, or mixing drinks for a night of fun, the EXO BackDeck is the perfect solution, turning your EXO system from gear hauler to working surface to bar top in seconds. When you're done, simply stow it and get back on the road. - Connects to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - 50" x 17" UV protected bamboo work surface - Tool-free, locking SpeedKnobs attach and lock EXO BackDeck to EXO SwingBase or EXO TopShelf - Included bag protects the tabletop when not in use and makes for easy transport - Sized to store inside the EXO GearLocker or EXO GearWarrior - 80lb weight capacity - 1 Year Warranty - Not intended to be used as a cutting surface - Requires EXO SwingBase and/or EXO TopShelf Product Specs: - Weight: 10.80 lbs. - Dimensions: L 17.00 in x W 50.50 in x H 0.75 in - Limited One Year Warranty
Make the most of your EXO GearLocker with the EXO GearTotes, collapsible, dividable totes that make it easy to stay organized from house to vehicle to destination and back again. A durable ripstop nylon build, and 50-pound carrying capacity make these perfect for everything from groceries to gear. - Heavy-duty totes carry up to 50 lbs. of gear each - Perfectly sized for the EXO GearLocker - Totes fold flat for easy storage when not in use - Includes a removable divider with hook-and-loop attachment - Structural webbing handles make it easy to haul loaded totes to your vehicle or campsite - Made of 600D fabric with durable PU Coating - Each tote measures 13" x 17.5" x 9" - Sold as a 2-Pack - 1 Year Warranty Product Specs: - Weight: 4.09 lbs. - Dimensions: L 18.00 in x W 13.50 in x H 9.50 in - Limited One Year Warranty
Organize and stow your camp kitchen gear with this all-in-one system, simplifying your effort so it’s always ready to grab-and-go. The rugged, road-worthy box can seamlessly attach to the EXO System for smooth transport to your campsite, trailhead, or ball game. Open it up and turn it into a fully functional work station, making it easy to prep, cook, and serve from the same spot. The system can also be expanded with side-mounted tables and a free-standing Leg kit to grow and customize your EXO OpenRange as needed. PRODUCT DETAILS - Connects to the EXO SwingBase or EXO TopShelf in seconds using the included EXO cleat system - Durable rotomolded enclosure with a rubber door seal keeps your gear fully protected from weather, dust, and critters - Fold down front door allows easy access to your gear and can be used as a prep surface - Internal shelf and integrated utensil drawer help to organize your cooking and camp gear - 85 liters (90 quarts) of internal storage space - Includes SKS locking latches to secure your gear - Tool-free, locking SpeedKnobs attach and lock EXO OpenRange to EXO SwingBase or EXO TopShelf - Includes a lantern hook, backboard organizer and handheld bottle opener - Full suite of accessories available to expand your EXO OpenRange - EXO SwingBase and EXO TopShelf recommended but not required for transport - Made in the USA PRODUCT SPECS - Weight: 37.00 lbs. - Dimensions: L 31.00 in x W 18.00 in x H 18.00 in - Limited Lifetime Warranty
Getting pressurized water to your destination just got even easier. The EXO RoadShower Kit lets you attach the RoadShower 4G and 7G to your EXO system giving you more mounting options for your RoadShower. Product Details - Connects RoadShower 4G and 7G to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - Tool-free, locking SpeedKnobs attach and lock RoadShower 4G and 7G to EXO SwingBase or EXO TopShelf - Heavy-duty steel construction with durable, powder-coated finish - Includes all mounting hardware (EXO System and RoadShower are sold separately) - Not compatible with RoadShower 10G Product Specs - Weight: 2.46 lbs. - Dimensions: L 14.00 in x W 3.00 in x H 4.00 in
We made hauling from home to vehicle to anywhere a snap with the EXO WarriorWheels—wheels and a handle that connect to your EXO GearWarrior, even while it's still on your hitch. Simply snap it together and wheel your gear to wherever you're headed next, whether it's basecamp, the beach or the marina. - Connects to the EXO GearWarrior (or other Warrior baskets) in minutes without tools - All-terrain tires maneuver well over all types of surfaces and handle curbs and roots with ease - Roll up to 110 lbs. of gear to your camp or soccer practice - Large easy to grab handle is positioned to allow for maximum control when going downhill - 2 Year Warranty - Not intended to remain installed during vehicle transport Product Specs: - Weight: 18.50 lbs. - Dimensions: L 64.00 in x W 21.00 in x H 39.00 in - Limited Two Year Warranty
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
Yakima's Glass Hatch Hook is an alternative strap for "Joe" series racks used on cars where standard hooks cannot be used.
The HD Bar SL Adaptor allows you to run the HD Bar on Yakima StreamLine towers so you can take advantage of our burliest crossbar ever. Give your vehicle a heavy-duty look and the strength to back it up. - Adapter required to use HD Bar with StreamLine Towers. Sold in a set of four. - Works with BaseLine, TimberLine, SkyLine and RidgeLine Towers only. - Weight: 0.42 lbs - Dimensions: L 1.75in x W 1.50in x H 1.00in - No Assembly Required
Yakima's HandCuff keeps your bikes secure when attached to the SwingDaddy and RidgeBack (both sold separately). Plus, there's a universal key and an additional SKS Lock Core so you can have the same key that locks your bikes to the rack and your rack to the hitch.
Got a downhill bike - Fully padded cradle accommodates dual-crown suspension forks - For use with HangTight 4 and 6 only - Accommodates 1 bike up to 37.5 lbs. - Fits most modern flat and drop-crown style dual-crown suspension forks
Getting your gear onto your rack isn't complete until you've secured it. This pair of super strong box-stitched 16" straps include soft, rubber-coated buckles to protect your boats and gear from scratches.
Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.
Yakima's Hood Anchor creates a secure attachment point at your hatch, trunk or hood for bow and stern tie downs. Sold in pairs, they’re highway-speed strong, coated to protect your vehicle’s paint job, and super easy to use - just drop them in place. Product Details - Creates a secure attachment point for bow and stern tie downs - Fits easily under a hood, hatch or trunk - Installation is simple - just drop them in place - Durable coated strap protects your vehicle's paint - Sold as a pair Technical Specs - Weight: 0.43 lbs - Dimensions: L 6.50in x W 2.00in x H 10.12in
Pair of EndCaps for Yakima JetStream bars.
The KeelOver attaches directly to any roof rack for a quick, tool-free assembly, right out of the box. Not only will your canoe arrive to the water safely, but you'll get to spend more time on the water, making for many happy paddlers. - Universal design attaches to round, square, aerodynamic and factory bars with a single tightening knob - Includes canoe securing straps and bow / stern tie-downs ensuring you have everything needed for a single canoe - Durable over-molded rubber cushions the canoe gunwale while providing stability - Simple, tool-fee installation and assembly within minutes of opening the box - Dual bolts included to ensure an integrated fit to vehicle - Rubber padding protects your crossbars from damage or corrosion
Custom Landing Pads to install directly to the factory fixed mounting points of the 2005+ Toyota Tacoma. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty
Landing Pad designed to fit a variety of BMW vehicles with fixed 7mm threaded mounting points. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty
Custom Landing Pads to install directly to the factory mounting points on raised rails of the 2020+ Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs: - Weight: 0.60 lbs. - Limited Lifetime Warranty
There's no need to worry when your bikes are unattended with Yakima's Lockup lock. The Lockup does double duty, locking your bike to the carrier and your hitch-mounted carrier to the car.
Yakima's Locking Brackets replace two of the regular mounting brackets that come with your MegaWarrior and LoadWarrior luggage carriers so that you can safely secure these baskets to your crossbars. You get two Locking Brackets, Lock Cores and keys.
The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage - Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in
Product details: - Durable and flexible nylon adapters designed specifically for CORE and JETSTREAM crossbar shapes - Allows most RoundBar style mounts to attach in minutes - Tool free installation - Sold as a set of 4 - Compatible with HighRoller, Raptor, WheelFork, HullyRollers, Mako Saddles, KayakStacker, Multimount, Accessory Lock Housing, and Basketcase
Page 1 of 6 Next page